Description:

The 14” STIHL TS 700 cut-off machine is the powerhouse of the STIHL line. Designed for superior handling during the toughest jobs, this machine features a powerful, high-speed engine, large fuel capacity, five-point dual element vibration control system built right into the handle and a semi-automatic belt tensioner with an innovative ribbed belt. Its X2 filtration system is low maintenance and cleans airflow with nearly 100 percent efficiency, reducing downtime for filter maintenance. Each component on this machine was meticulously engineered with demanding professionals in mind.

Features:

• Decompression Valve - The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• X2 Air Filtration System - The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Bayonet-Style Filler Cap - Includes retainer for easy use, even with gloves on.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Semi-Automatic Belt Tensioning - With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings
• Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.

Specifications:

• Power Source: Gas
• Weight: 25.6 lbs.
• Maximum Cutting Depth: 4.9 in.
• Maximum Wheel Size: 14 in.
• Maximum Spindle Speed: 5,350 rpm
• Arbor Size: 0.787 in.
• Engine Speed: 9,300 rpm
• Engine Power: 6.7 bhp
• Fuel Capacity: 40.6 oz.
• Displacement: 98.5 cc

Description:

The STIHL® MS 251 WOOD BOSS® chainsaw is designed to deliver all the power you would expect from STIHL® equipment yet with a comfortable and ergonomic design. The MS 251 WOOD BOSS® is perfect for felling small trees, pruning and thinning and cutting firewood simply and efficiently. With up to 20 percent fuel savings and 50 percent reduced emissions (as compared to previous models), you can enjoy a longer run time while feeling good about your impact on the environment. Features like a master control lever and reduced vibration make the STIHL® MS 251 WOOD BOSS® a lean, easy-to-use machine that still packs plenty of power.

Features:

• Tool less fuel and oil caps with retainers simply lift the lever and twist the caps to remove or tighten
• Large starting handle is easy to grip
• Zero or low exhaust emissions
• Front hand guard is designed to reduce the risk of injury
• Front handle is designed for a secure grip
• Protected spark plug is protected, yet easy to change
• Air filter cover is easy to remove for fast and easy filter cleaning or replacement
• Smooth clean design has no rough edges to snag on clothing or brush

Specifications:

• Type: Chainsaw
• Brand: STIHL®
• Sub Brand: WOOD BOSS®
• Model: MS 251

Key Features:

• Engine: 2-Cycle, 45.6 cc
• Power Source: Gas
• Start: Pull Start
• Bar Length: 18 inches
• Chain Brake: Yes
• Tension Adjustment: Quick-Adjust
• Antivibration Handle: Yes

Compliance:

• CARB Compliant: Yes
• CSA Listed: No

Additional Info:

• Case: Not included
• Warranty: 1 year
• Grade: Professional

Description:

When you need to do a heavy cleaning on your deck, house, or equipment, the STIHL® RB 200 pressure washer does it all without fuss. Its powerful 190 cc (11.87Nm) engine delivers 2,500 psi of water pressure —powerful enough to tackle tough cleaning jobs on sidewalks, driveways, decks, and more. This power washer also features an Easy Start™ pump system, so no hard pulls or difficult starts. It also comes standard with a detergent injector system, so you can easily add detergents to the washer for efficient cleaning. With its 25' no-kink flex hose, you can clean more area without having to move the machine. Finally, the RB 200 pressure washer uses a wide range of cleaning accessories for maximum utility. Optional accessories include a rotary surface cleaner, water broom, multi-function nozzle, long-range nozzle, hose extension, gutter cleaner, wand extension, pivot coupler, and official STIHL® cleaning agents.

Features:

• Powerful 190 cc Engine - The proven Briggs & Stratton® engine gives users enough power while still providing the trusted performance they’ve come to expect.
• Easy Start™ Pump System - The Easy Start™ Pump System features a pressure relief valve, allowing users to start the unit without any back pressure from the pump. It enables quick, easy starting with no hard cord pulls.
• Steel-Braided Hose - The steel-braided hose is designed to prevent kinks and bursts.
• 2,500 psi Water Pressure at 2.3 Gallons Per Minute (GPM) - The 2,500 psi of water pressure at 2.3 gallons per minute provides powerful cleaning.
• Stainless Steel High Pressure & Brass Detergent Nozzles - This pressure washer includes stainless steel nozzles for use with high-pressure water and a brass nozzle for use with detergent. These premium nozzles are designed to resist corrosion and wear.
• Two-Piece Lance & Gun Assembly - This pressure washer features an easy, convenient two-piece lance and gun assembly. The lance design is also extended for better accuracy in tall applications.
• Easy-Access Inlet & Outlet Water Connections - Both inlet (water coming into the pump) and outlet (water going from the pump to the gun) connections are easy to access for faster setup.
• Wide Range of Optional STIHL® Accessories - Experience the flexibility to clean just about any surface.
• Comfortable Spray Gun with Reverse-Pull Trigger - The comfortable spray gun with its reverse-pull trigger minimizes effort and fatigue.
• Detergent Injector System - Detergent injector system allows users to apply detergents directly through the pressure washer for efficient cleaning.
• Durable Design - Durable design built with high-quality components.

Specifications:

• Power Source: Gas
• Weight: 57.3 lbs.
• Water Pressure: 2,500 psi (pounds per square inch)
• Water Flow: 2.3 gpm (gallons per minute)
• Cleaning Units: 5,750 (CU, calculated by multiplying PSI by GPM)
• Hose Length: 25 ft.
• Engine Power: 11.87Nm bhp (brake horsepower)
• Fuel Capacity: 33.8 oz.
• Displacement: 190.0 cc (cubic centimeters)
• Noise Level: 91 dB(A)

Description:

With its low noise and zero exhaust emissions, the clean, quiet operation of the RE 80 corded electric pressure washer provides users with quality performance in a compact, lightweight, and low-maintenance package. The high-quality design and components—including stainless steel pump pistons and aluminum pump manifold—are designed to resist corrosion and wear. The upright handle design and integrated wheels optimize mobility and portability while the comfortable spray gun with its reverse-pull trigger minimizes effort and fatigue. Plus, the RE 80 comes standard with an adjustable nozzle and detergent sprayer, allowing users to take on even more cleaning tasks.

Features:

• IPX5 Rating - This tool has IPX5-rated weather-resistant construction and has been designed and tested for water jet protection.
• Easy to Use - With low noise, zero exhaust emissions, and no need for fuel, this electric pressure washer is easy-to-use and delivers STIHL® quality in a low-maintenance package.
• Comes Standard with Two Nozzles and Detergent Sprayer - The included adjustable flat-jet nozzle, rotary nozzle, and detergent sprayer accommodate various cleaning tasks.
• Efficient and Virtually Maintenance-Free Motor - The brushless motor is ideal for noise-sensitive environments with virtually zero maintenance required.
• Stainless Steel Pump Pistons and Aluminum Pump Manifold - The high-quality design and components—including stainless steel pump pistons and aluminum pump manifold – are designed to resist corrosion and wear.
• Two-Piece Lance & Gun Assembly - This pressure washer features an easy, convenient two-piece lance and gun assembly. The lance design is extended for better accuracy in applications requiring extension.
• Easy-Access Water Connections - Both inlet (water coming into the pump) and outlet (water going from the pump to the gun) connections are easy to access for faster setup.
• Upright Grab Handle - This sturdy, upright handle allows for easy maneuverability during transportation and while the unit is in use. Operators do not have to stoop or crouch to access the upright handle.
• On-Unit Wheels - The on-unit wheels allow for easy transportation, both while the unit is powered off and while in use.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL® Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL® Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Electric
• Weight: 16.5 lbs.
• Water Pressure: 1,600 psi
• Water Flow: 1.2 gpm (gallons per minute)
• Cleaning Units: 1,920 (calculated by multiplying water pressure by water flow)
• Hose Length: 16.4 ft.
• Lance Length: 33 in.
• Power Cord Length: 35 ft.

Description:

The STIHL® SR 450 is a professional-grade sprayer that covers all the bases. Its low exhaust emission, fuel-efficient engine delivers a 20% greater spray range when compared to previous models. Ideal for distributing liquid or solid compounds, this backpack sprayer/duster converts from misting to dusting applications without any special tools or additional equipment. It’s easy to use and provides excellent control over product feed and air speed.

Features:

• Anti-Vibration System - The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Multi-Function Control Handle - Having easy access to all of the controls on one comfortable handle makes it easy to complete tasks so the operator’s hand never has to leave the handle.
• Adjustable Support Harness - STIHL® backpack blowers and sprayers are equipped with an adjustable support harness that distributes weight evenly across the shoulders and back, reducing user fatigue.

Specifications:

• Power Source: Gas
• Weight: 28.2 lbs.
• Container Capacity: 3.7 gal. (gallons)
• Maximum Spray Range: 48 ft.
• Air Volume: 542 cfm (cubic feet per minute)
• Engine Power: 3.9 bhp (brake horsepower)
• Fuel Capacity: 57.5 oz. (ounces)
• Displacement: 63.3 cc (cubic centimeters)

Description:

Versatile enough for general construction applications, but well suited for limited access cuts, the TS 440 represents the latest in professional cutting solutions from STIHL. The extended guard adjustment range of the TS 440 allows greater access in challenging cuts such as the bottom portions of walls, cutting in corners, and cutting the underside of in-ground pipes. This expanded guard adjustability is made possible due to the sensor-activated STIHL Quickstop® wheel brake technology. The TS 440 is the first cut-off machine in the world equipped with the technology capable of stopping the rotation of the cutting wheel in fractions of a second if kickback occurs.

Features:

• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Bayonet-Style Filler Cap - Includes retainer for easy use, even with gloves on.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Water Connection - Water connection with shut-off valve and quick connector.
• STIHL QuickStop™ Wheel Brake - Allows extended guard adjustability by reducing the risk of injury from kickback when the guard has been adjusted to expose the top portion of the wheel 
• Wheel Guard - Extended wheel guard adjustability range increases utility of machine for certain cutting circumstance
• Choke Lever and Purge Pump Primer - Conveniently located together for easier starting.
• Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
• Electronic Water Control (EWC) - Electronic Water Control allows the operator to easily adjust the flow of water while cutting and stops the water flow when the machine is at idle.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• X2 Air Filtration System - The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.

Specifications:

• Power Source: Gas
• Weight: 24.7 lbs.
• Maximum Cutting Depth: 4.9 in.
• Maximum Wheel Size: 14 in.
• Maximum Spindle Speed: 2,525 rpm
• Arbor Size: 0.79 in.
• Engine Speed: 9,000 rpm
• Engine Power: 4.4 bhp
• Fuel Capacity: 24 oz.
• Displacement: 66.7 cc